Podotech - Peel and Stickgel Panel - 406 x 457mm x 3mm

Custom Peel-and-Stick Gel Padding for Orthotics & Podiatry

A versatile, low-durometer gel sheet with reusable adhesive backing, designed for precise padding, friction relief and custom insole or orthotic applications.

Best for: practitioners and users needing targeted cushioning, custom-cut gel pads or full insole lining for comfort and pressure distribution.

Not ideal for: users seeking rigid structural correction or permanent bonded footwear components.

• Low durometer polyurethane gel for soft, compliant cushioning
• Peel-and-stick adhesive backing for accurate placement
• Transparent material with integrated silver antimicrobial properties

Expected comfort and use timeline

First use: The gel sheet typically feels soft and immediately cushioning on contact. When applied to clean, dry surfaces, the adhesive backing allows secure placement without permanent bonding.

Short-term use (first few days): Users often notice reduced friction and improved comfort in targeted areas such as heels, forefoot, or areas prone to rubbing. Minor adjustments in placement or trimming are common as users fine-tune fit.

What is it?

Podotech Peel and Stick Silicone Gel Sheets are flat sheets of low-durometer polyurethane gel combined with a peel-off adhesive backing. The material is transparent and flexible, allowing it to conform closely to footwear, insoles, prosthetic interfaces, or directly to orthotic components.

The gel incorporates ionic silver within a hydrophilic film structure. Silver ions diffuse from the surface of the gel, helping to limit bacterial regeneration on the padding surface during normal wear.

Who is it for?

This product is intended for a wide range of users and applications, including:

• Podiatrists and foot health practitioners creating custom pads or modifications
• Orthotics professionals seeking additional cushioning or friction reduction
• Prosthetic professionals managing localised pressure or abrasive “hot spots”
• Individuals requiring adaptable gel padding for comfort or protection

It is suitable for both clinical and personal use where custom sizing, placement, and adaptability are important.

What does it help with?

• Heel discomfort: May help cushion sensitive heel areas when used as heel lifts or heel spur pads
• Forefoot pressure: Can reduce localised pressure when cut into metatarsal or forefoot pads
• Friction points: Supports skin protection in areas prone to rubbing or shear
• Insole comfort: Allows conversion of standard insoles into gel-lined insoles
• Prosthetic interfaces: Designed to cushion and protect areas exposed to abrasion

How does it work?

The low durometer polyurethane gel deforms gently under load, spreading pressure over a wider area rather than concentrating it at a single point. This helps moderate peak pressures and shear forces.

The peel-and-stick backing allows the sheet to be positioned precisely where cushioning is required. Unlike permanent adhesives, the reusable adhesion enables repositioning, removal, and replacement as needs change.

The integrated silver antimicrobial surface works continuously at the gel interface, supporting a cleaner padding surface during repeated wear.

Problem and solution overview

Key benefits

• Soft, low-durometer gel designed for comfort and pressure moderation
• Peel-and-stick backing allows accurate, repeatable placement
• Reusable adhesion supports adjustments and re-use
• Transparent appearance for a discreet finish
• Trim-to-fit design supports custom pads and full insole liners
• Gel construction resists leakage when cut

Common mistakes to avoid

• Expecting structural correction rather than cushioning and protection
• Applying to dirty or damp surfaces, which can reduce adhesion
• Using excessive thickness in tight footwear
• Ignoring early signs of discomfort instead of adjusting placement

How to use

1. Clean and dry the surface where the gel will be applied.
2. Cut the gel sheet to the required shape using scissors.
3. Peel off the protective backing to expose the adhesive surface.
4. Position carefully and press into place, smoothing from the centre outward.
5. Test fit footwear or prosthetic interface before extended wear.
6. Remove, clean, and reposition as required.

Technical specifications

Frequently asked questions

Can the gel sheet be reused?

Yes. When kept clean and applied to appropriate surfaces, the adhesive backing is designed for repeated use.

Is it suitable for full insole lining?

The sheet can be cut to full insole size, making it possible to add gel cushioning to existing insoles.

Will it fit in all shoes?

Footwear depth varies. Slim or tight shoes may feel more snug when gel padding is added.

Is it safe for sensitive skin?

The gel is designed for skin contact, but users with very sensitive skin should monitor comfort and skin condition regularly.

Does the silver replace cleaning?

No. The antimicrobial properties support hygiene, but regular cleaning is still recommended.

Can it be used with orthotics?

Yes. It can be applied to orthotics or insoles to provide additional cushioning or protection.

Complementary and pairing suggestions

• Orthotic insoles requiring additional cushioning layers
• Heel cups or heel lifts for combined shock absorption
• Metatarsal pads for targeted forefoot support
• Protective dressings for high-friction areas

Content credibility

Written by: Algeos Product & Clinical Content Team
Last reviewed: January 2026

This content is provided to support informed purchasing decisions. It is intended for general guidance only and does not replace professional assessment or medical advice.