Aortha DeZolve Adhesive Glue Remover
Aortha DeZolve Adhesive Glue Remover is an organic liquid compound used to dissolve contact adhesives.
Helps break down sticky residues so tools, surfaces and materials can be cleaned more effectively after bonding work.
The 1 litre tin is practical for repeat use in orthotic labs, prosthetic workshops, footwear repair settings and fabrication areas.
It is applied directly to the affected area using a cloth, brush or sponge, then left briefly so the solvent can penetrate and soften the residue before wiping clean.
Product Description
Adhesive Cleaning Solution for Removing Contact Adhesive
Aortha DeZolve is a professional adhesive cleaning solution for removing contact adhesive residue from tools, benches, moulds, footwear components and workshop surfaces. It is designed for orthotic, prosthetic, footwear repair, manufacturing and craft environments where clean working surfaces are essential for accurate preparation and a professional finish.
Supplied in a 1 litre tin, it helps dissolve solvent based glues and contact adhesive residues, supporting cleaner preparation before bonding, finishing or further fabrication work.
Key selling points
Removes adhesive residue
Helps break down sticky contact adhesive residues so tools, surfaces and materials can be cleaned more effectively after bonding work.
Workshop-ready format
The 1 litre tin is practical for repeat use in orthotic labs, prosthetic workshops, footwear repair settings and fabrication areas.
Useful across common tasks
Suitable for cleaning glue residue from workbenches, tools, moulds, shoe uppers, soles, lasts and general workshop equipment where compatible.
Cleaner surface preparation
Supports better preparation before further processing by helping remove residues such as contact adhesive, grease, oil, wax, tar, paraffin and printing ink.
What it does and how it works
Aortha DeZolve is an organic liquid compound used to dissolve contact adhesives and solvent based glue residues. It is applied directly to the affected area using a cloth, brush or sponge, then left briefly so the solvent can penetrate and soften the residue before wiping clean.
In practical workshop use, this helps reduce residue build-up on tools and surfaces, improves cleanliness around bonding areas and makes it easier to prepare materials for the next stage of work. It is especially useful where contact adhesives are used frequently and excess glue needs to be removed from working surfaces or components.
Common problems it may help with
Sticky contact adhesive residue
Helps dissolve remaining glue after bonding, trimming or repair work.
Contaminated tools and benches
Useful for keeping work areas cleaner when adhesives are used regularly.
Surface preparation before bonding
Can help remove residue that may interfere with clean material preparation.
Workshop residue from oils and waxes
May also be used to remove sealants, oil, grease, silicone, wax, tar, paraffin and printing ink where material compatibility allows.
Applications and suitability
Orthotic and prosthetic workshops
Suitable for cleaning adhesive residue from moulds, workbenches, tools and fabrication surfaces used in orthotic and prosthetic production.
Footwear manufacturing and repair
Useful for removing excess adhesive from compatible shoe uppers, soles, lasts and repair components to support a cleaner finish.
Industrial and craft environments
Suitable for general adhesive residue removal where solvent based cleaning is appropriate and surfaces have been checked for compatibility.
Professional users
Well suited to technicians, orthotic lab staff, footwear repairers, fabricators and workshop teams who use contact adhesives as part of routine work.
Who it may not suit
- Not suitable for use by children or untrained users.
- Not suitable for enclosed, poorly ventilated spaces.
- Not suitable near naked flames, sparks, hot surfaces or other ignition sources.
- Not intended for skin cleaning, wound care, clinical instrument disinfection or direct patient use.
- Not suitable for materials that may be damaged, softened, stained or discoloured by solvent cleaners. Always test a small hidden area first.
- Not suitable where a toluene-free adhesive remover is required.
Adhesive Glue Remover - 1 Litre
Aortha DeZolve Adhesive Cleaning Solution - 1 litre tin.
Product specifications
| Product name | Aortha DeZolve Adhesive Glue Remover |
|---|---|
| SKU | RA1286 |
| Supplied as | 1 litre tin |
| Product type | Adhesive cleaning solution / solvent adhesive remover |
| Primary use | Dissolving contact adhesives and solvent based glue residues |
| Typical application method | Cloth, brush or sponge |
| Typical users | Orthotic workshops, prosthetic workshops, footwear repairers, fabricators, manufacturing teams and craft users |
| Storage | Store in a cool, dry place away from direct sunlight, heat and ignition sources |
Usage instructions
- Prepare the area: Remove loose dust and debris before applying the cleaner.
- Check compatibility: Test on a small hidden area before using on plastics, coated surfaces, leather, rubber or finished materials.
- Apply carefully: Apply Aortha DeZolve to the adhesive residue using a cloth, brush or sponge.
- Allow to work: Leave for a few moments so the solution can penetrate and soften the adhesive residue.
- Wipe clean: Remove dissolved residue with a clean cloth.
- Repeat if required: Stubborn residues may need a second controlled application.
- Dispose safely: Dispose of used cloths, waste product and containers according to local regulations.
Benefits
Cleaner working areas
Helps reduce sticky build-up on benches, tools and fabrication equipment.
Improved workflow
Supports faster clean-up between adhesive tasks, repairs and material preparation stages.
Professional finishing
Helps remove excess adhesive from compatible components for a cleaner final appearance.
Versatile workshop use
Can be used for several residue removal tasks, including solvent based glues, oils, grease, wax and similar workshop contaminants.
Contraindications & warnings
- Danger: Flammable liquid and vapour. Keep away from heat, sparks, open flames and hot surfaces.
- May be fatal if swallowed and enters airways. Do not ingest and never induce vomiting if swallowed; seek immediate medical attention.
- May cause skin irritation. Wear suitable gloves and avoid repeated or prolonged skin contact.
- May cause drowsiness or dizziness. Use only in a well-ventilated area and avoid breathing vapour.
- Suspected of damaging fertility or the unborn child. Handle according to the safety data sheet and workplace risk assessment.
- May cause damage to organs through prolonged or repeated exposure. Professional handling controls should be followed.
- Wear eye protection when handling to reduce the risk of eye contact.
- Keep container closed when not in use and store away from direct sunlight and sources of heat.
FAQs
What is Aortha DeZolve used for?
Aortha DeZolve is used to dissolve contact adhesive and solvent based glue residues. It is typically used in orthotic, prosthetic, footwear repair and workshop environments to clean tools, benches, moulds and compatible material surfaces.
Can it be used on footwear?
Yes, it may be used to help remove excess adhesive from compatible shoe uppers, soles and lasts. Always test a small hidden area first because some materials, finishes or coatings may react to solvent cleaners.
How do I apply it?
Apply a controlled amount with a cloth, brush or sponge directly to the adhesive residue. Allow it to work briefly, then wipe the area clean with a fresh cloth.
Is it suitable for orthotic fabrication workshops?
Yes, it is suitable for workshops where contact adhesives are used during orthotic and prosthetic fabrication. It can help clean adhesive residues from moulds, workbenches, tools and compatible components.
Does it remove anything other than adhesive?
It may also be used for residue removal tasks involving sealants, oil, grease, silicone, wax, tar, paraffin and printing ink. Material compatibility should be checked before use, especially on plastics, coated surfaces and finished materials.
Can it be used in a clinic treatment room?
This product is a workshop solvent cleaner, not a clinical surface disinfectant or patient care product. Use it only where solvent handling is appropriate, ventilation is adequate and workplace safety controls are in place.
What safety precautions should be followed?
Use in a well-ventilated area, wear gloves and eye protection, and keep away from heat, sparks and flames. Store the container closed in a cool, dry place and follow the safety data sheet for handling and disposal.
Is it a toluene-free product?
No. The safety data sheet identifies toluene as a hazardous component of this product. If a toluene-free remover is needed, choose an alternative product designed for that requirement.
Related Links
Product Summary
Aortha DeZolve Adhesive Glue Remover is a 1 litre solvent cleaning solution for dissolving contact adhesive and solvent based glue residues. It is used by orthotic, prosthetic, footwear repair, fabrication and workshop professionals to clean tools, benches, moulds and compatible materials before further preparation or finishing. Use with suitable ventilation, gloves and eye protection, and follow the safety data sheet when handling, storing and disposing of the product.
Frequently bought together
Sold: 500ml
Incl. VAT Exl. VAT
Sold: 500ml
Incl. VAT Exl. VATSold: 500ml
Incl. VAT Exl. VAT
Sold: 2 Sizes
Incl. VAT Exl. VAT
Sold: 1 Litre
Incl. VAT Exl. VATSold: 1 Litre
Incl. VAT Exl. VAT
Sold: 5 Litres
Incl. VAT Exl. VAT
Sold: 1 Litre
Incl. VAT Exl. VAT