Slimflex PU Metatarsal Pads for Orthotic Insoles - Micro Hook
Polyurethane metatarsal pads with micro hook backing for use with compatible Slimflex insoles and orthotic devices.
Designed to sit just behind the metatarsal heads to help redistribute forefoot pressure and provide targeted support.
The repositionable micro hook backing allows easy adjustment during fitting.
Available in three sizes and supplied in a pack of 10 units.
Sold: Pack of 10 pairs
Incl. VAT Exl. VAT
Product Description
Slimflex PU Metatarsal Pads for Orthotic Insoles - Micro Hook
Micro hook-backed polyurethane metatarsal pads for adapting Slimflex insoles and compatible orthotic devices.
These pre-formed metatarsal domes are designed to sit just behind the metatarsal heads, helping redistribute forefoot pressure and provide targeted support within an existing insole or orthotic setup.
The micro hook backing allows quick positioning on compatible insole surfaces without the permanent attachment of a self-adhesive pad. This makes them particularly useful for clinicians and orthotic technicians who may need to reposition the dome while optimising fit and function.
Key Selling Points
Helps redistribute forefoot pressure
Positioned just behind the metatarsal heads, the dome helps spread load across the forefoot and reduce concentrated pressure beneath sensitive areas.
Micro hook attachment
The micro hook backing grips compatible Slimflex insole surfaces, allowing straightforward placement without adhesive.
Easy to reposition
Unlike permanently bonded self-adhesive additions, the micro hook design allows the position to be adjusted when fine-tuning an orthotic setup.
Upgrades existing insoles
A practical way to introduce targeted metatarsal support without replacing the complete insole or orthotic device.
Durable polyurethane construction
PU construction provides a supportive dome profile while retaining a degree of compliance under repeated loading.
Choice of three sizes
Available in Sizes 2, 3 and 4 to accommodate different foot sizes and required dome profiles.
What It Does / How It Works
Slimflex PU Micro Hook Metatarsal Pads are pre-formed orthotic additions designed to provide targeted support just proximal to the metatarsal heads.
The raised dome supports the metatarsal shafts and helps distribute plantar pressure across a broader area of the forefoot rather than allowing loading to remain concentrated beneath individual metatarsal heads.
The micro hook backing provides secure engagement with compatible insole surfaces while allowing the pad to be repositioned when necessary. This can be particularly useful during clinical fitting, where small changes in dome position can significantly affect comfort.
Size 4 has a higher profile than Sizes 2 and 3, providing a more pronounced dome for situations where additional support is appropriate.
Common Problems It May Help With / Why Someone Would Use It
Pressure beneath the ball of the foot
May help reduce localised forefoot pressure by supporting the metatarsal shafts just behind the metatarsal heads.
General metatarsal discomfort and metatarsalgia
Can form part of an insole modification designed to improve forefoot load distribution during walking or standing.
Orthotic fine-tuning
Allows clinicians to alter the position of the metatarsal dome without immediately committing to a permanently bonded addition.
Existing insoles needing additional support
Adds targeted forefoot support without requiring replacement of the complete insole.
Who It’s Suitable For
- Podiatrists, orthotists, foot health professionals and orthotic technicians.
- Users of compatible Slimflex insoles requiring additional metatarsal support.
- Existing orthotic or insole systems where targeted forefoot modification is required.
- Experienced orthotic users who understand correct metatarsal dome positioning.
- Clinical situations where the pad position may need to be adjusted during fitting.
Who It May Not Be Suitable For
- Use directly against bare skin.
- Insoles without a compatible surface for the micro hook backing.
- People requiring a fully custom-moulded orthotic solution rather than a simple insole addition.
- Footwear with insufficient internal depth or volume.
- Users who are unsure about correct metatarsal dome positioning.
- Anyone experiencing sharp pain or worsening discomfort after fitting.
Product Specifications
| Product type | Metatarsal pad for insole and orthotic adaptation |
|---|---|
| Material | Polyurethane (PU) |
| Attachment | Micro hook backed |
| Fit | For positioning on compatible insoles and orthotic surfaces |
| Sizes available | Size 2, Size 3, Size 4 |
| Size 2 dimensions | Approx. 50mm x 37mm x 7mm (fits UK 4-5) |
| Size 3 dimensions | Approx. 50mm x 44mm x 7mm (fits UK 6-7) |
| Size 4 dimensions | Approx. 51mm x 46mm x 10mm (fits UK 8+) |
| Pack size | 10 units |
| Care | Clean gently with a damp cloth when required |
| Brand | Slimflex |
Usage Instructions
- Remove the insole from the shoe.
- Identify the correct placement point just behind the metatarsal heads.
- Position the micro hook side of the pad against the compatible insole surface.
- Press firmly so the hook backing engages securely with the insole.
- Replace the insole in the footwear and check comfort while standing and walking.
- If required, remove and reposition the pad until the appropriate position is achieved.
- Begin with shorter wear periods and gradually increase use as comfort allows.
Benefits
- Simple way to add targeted forefoot support to an existing insole.
- Helps optimise pressure distribution beneath the forefoot.
- Micro hook backing allows straightforward placement on compatible Slimflex surfaces.
- Can be repositioned when fine-tuning an orthotic or insole setup.
- No adhesive backing needs to be removed.
- Suitable for clinical and orthotic workshop use.
- Three sizes provide different dimensions and dome profiles.
- Durable polyurethane construction designed for repeated loading.
Contraindications & Warnings
- Do not apply directly to bare skin.
- Use only with an insole or orthotic surface capable of securely engaging with the micro hook backing.
- Correct placement is essential. The pad should normally sit just behind the metatarsal heads rather than directly underneath them.
- Do not assume a higher-profile pad is automatically more suitable. Size and height should be selected according to foot structure, footwear and user tolerance.
- Check that the pad is securely engaged before replacing the insole in the shoe.
- Avoid prolonged wear immediately after first fitting. Build up wear time gradually.
- Do not use in footwear without adequate depth to accommodate the insole and metatarsal pad.
- If the pad causes sharp pressure, pain or worsening symptoms, discontinue use and reassess the fitting or seek professional guidance.
FAQs
What are Slimflex PU Micro Hook Metatarsal Pads used for?
They are orthotic additions used to introduce targeted metatarsal support to compatible insoles. Positioned just behind the metatarsal heads, they can help redistribute pressure across the forefoot.
What is the advantage of the micro hook backing?
The micro hook backing attaches directly to compatible insole surfaces without adhesive. This makes application quick and allows the pad to be repositioned when adjusting the orthotic setup.
Can the pads be repositioned?
Yes. One of the main advantages of the micro hook design is that the pad can normally be removed and repositioned on a compatible insole surface, making it useful when fine-tuning placement.
How should the metatarsal pad be positioned?
The dome is generally positioned just behind the metatarsal heads rather than directly beneath them. Correct positioning should feel supportive rather than creating a concentrated pressure point.
Can these pads help with ball-of-foot discomfort?
They may help where discomfort is associated with concentrated forefoot loading and an insole modification is appropriate. Correct placement is important to achieve the intended pressure redistribution.
Can I use them with any insole?
The micro hook backing requires a compatible surface that allows the hooks to engage securely. They are particularly suited to compatible Slimflex insole systems.
Are they suitable for custom orthotics?
They may be used with compatible orthotic surfaces where an additional metatarsal dome is required. Suitability will depend on the construction and covering material of the orthosis.
Will the pads feel noticeable?
The dome may initially feel noticeable beneath the forefoot. It should feel supportive rather than painful, and users may benefit from gradually increasing wear time during the first few days.
What is the difference between the three sizes?
The sizes differ in width and profile. Size 2 measures approximately 50mm x 37mm x 7mm, Size 3 approximately 50mm x 44mm x 7mm and Size 4 approximately 51mm x 46mm x 10mm.
How many pads are supplied?
Each pack contains 10 individual metatarsal pads.
Summary
Slimflex PU Metatarsal Pads with Micro Hook backing are pre-formed polyurethane orthotic additions designed to provide targeted forefoot support within compatible insoles. The dome is positioned just behind the metatarsal heads to help redistribute pressure across the forefoot, while the micro hook backing provides quick attachment and allows the position to be adjusted when required.
Ideal for podiatrists, orthotists and other foot health professionals, they provide a practical method of fine-tuning an existing Slimflex or compatible orthotic setup without using a permanent adhesive-backed addition. Supplied in a pack of 10 units.
Sold: Pack of 10 pairs
Incl. VAT Exl. VAT