Dear Customer, You may be aware that we are unable to answer calls at present. This will affect us between 2pm and 3pm today. We're very sorry for any inconvenience caused.
We'd love to hear from you after 3pm, if you can call us back. Alternatively, you can place your order online or contact us by email at [email protected] and we'll aim to reply within 24hours.

Thank you for your patience.


Physioworx E-Pulse 300 Plus Tens Machine


Physioworx E-Pulse 300 Plus Tens Machine
PHYSIOWORX

Physioworx E-Pulse 300 Plus Tens Machine  

Reference: PX0300

Description

Channel: Dual, isolated between channels
Pulse intensity: Adjustable 0-80mA peak into 500 Ù load each channel, constant current
Pulse Rate: 1Hz-160Hz (adjustable), 1Hz/step (1-20Hz), 5Hz/step (20-160Hz)
Pulse Width: 50ìs - 260ìs (adjustable), 10ìs/step.
Patient Compliance meter: Shows the treatment times in hours.
Patient Lock System: Prevents the user from changing any fixed parameters set by the physician or licensed practitioner.
Software Ramp Up: By changing mode, the output will reset to zero then ramp up to its original setting intensity. It will protect users from a sudden surge.
Timer: 15, 30, 60 minute and continuous mode selectable
LCD: Shows modes, pulse rate, pulse width, timer, CH1/CH2.

Function Modes: B: Cycle Bursts, 2Bursts/sec, 9pulses/Burst, 100Hz, width is adjustable.
                             C: Continuous mode. Pulse rate, pulse width and intensity are adjustable.
                             M: Modulated Width. Pulse width is automatically varied in an interval of 6 seconds.

The modulation range of pulse width is from setting value to 35% less than the control setting value, then returns to the setting value. Rate, width and intensity are fully adjustable.


SDR: Strength Duration and Rate modulation. SDR consists of alternating modulated intensity (amplitude) and pulse rate so that one parameter is always increasing while the other is decreasing and vice-versa. The stimulation intensity decreases 20% from the intensity control setting and returns to the setting value; the pulse rate increase 45% from the modulated rate to the setting value and return to the modulated rate. Total cycle time is 6 seconds. Rate, Width and Intensity are full adjustable.

SDW: Strength Duration and Width modulation. SDW consists of Alternating modulated intensity (amplitude) and pulse width so that one parameter is always increasing while the other is decreasing and vice-versa. The stimulation intensity decreases 20% from the intensity control setting and returns to the setting value; the pulse width increase 54% from the modulated width to the setting value and return to the modulated width. Total cycle time is 6 seconds. Rate, width and intensity are full adjustable.

Wave Form: Asymmetrical Bi-phasic square pulse.
Voltage: 0-110 Volt (Open Circuit).
Max Charge Per Pulse: 21 micro-coulombs
Power Source: 9-Volt Battery.
Dimensions: 108mm(H)61.5mm(W)25mm(T).
Weight: 140grams (battery included).
 


Reviews

Product isn't rated yet.
Write a review.