Dear Customer, You may be aware that we are unable to answer calls at present. This will affect us between 2pm and 3pm today. We're very sorry for any inconvenience caused.
We'd love to hear from you after 3pm, if you can call us back. Alternatively, you can place your order online or contact us by email at [email protected] and we'll aim to reply within 24hours.

Thank you for your patience.

Mebus MTF 200HV Router

Mebus MTF 200HV Router

Mebus MTF 200HV Router 

Reference: LM4202


The MTF 200HV Router is ideal for use in orthotic and prosthetic manufacture and repair. Typically used for grinding prostheses, the MTF 200HV router provisions suction inside the arm cover to enable the technician to grind the prostheses from the inside.

The appliance is electronically height adjustable and is perfect for applications which require a maximum of free moving space.

  • Milling motor is adjustable from 0 to 90°.
  • The working height can be electronically adjusted from 1260 - 1760mm on a horizontal axis.
  • Adjustable chip collecting basin.
  • Additional partition of the arm holder behind the chip basin.
  • A collection branch for suction (Ø 125mm).
  • Axis suction with cover.
  • High performance motor with speed variations between 750 - 3000 U/min.
  • The control switch is located directly at the motor.
  • The router also features an emergency stop switch.
  • Dimensions: 60 x 125 x 130cm.
  • Voltage: 400V - 50-60Hz 3Ph (with frequency controller: 230V - 50-60Hz 1 Ph)
  • Weight:130kg.


  • Drill Chuck 1-13mm M16.
  • Fine Sanding Drum 85 x 58mm M16.
  • Rubber Sanding Drum 72.5 x 200mm.


Product isn't rated yet.
Write a review.