Dear Customer, You may be aware that we are unable to answer calls at present. This will affect us between 2pm and 3pm today. We're very sorry for any inconvenience caused.
We'd love to hear from you after 3pm, if you can call us back. Alternatively, you can place your order online or contact us by email at [email protected] and we'll aim to reply within 24hours.

Thank you for your patience.

CIL Release 1711E - 500ml


CIL Release 1711E - 500ml 

Reference: RA3044

Please register and log-in to buy this product


CILRelease 1711E is a silicone based aerosol release agent and the industry standard for the release of Epoxy, Polyester Resin, Polyurethane and rubber compounds.

Features & Benefits:

  • Gives components a satin/dry finish
  • the industry standard for releasing Epoxy and Polyester resins
  • An excellent release for Polyurethane elastomers and Integral-Skin PU foam
  • A versatile release for rubber compounds such as NR, NBR, HNBR and EPDM

How to use:
For best results, spray lightly and evenly onto the mould surface. Any excess should be wiped off with a lint-free cloth.

CILRelease 1711E is usually applied to moulds operating from room temperature to 180°C. However, make sure at high mould temperatures that no sources of ignition are in the spraying area.

Physical properties:
Appearance: Colourless liquid (non-corrosive)
Solvent type: Butane/Propane
Shelf life: 24 months



Product isn't rated yet.
Write a review.